Cutting Height Range
1 1/2 - 12 in. (3.8 - 30.5 cm)
1 1/2 - 12 in. (3.8 - 30.5 cm)
Weight
Pull-Type Dual Tailwheel - 1,632 lb. (740 kg) with front and rear chain guards and hydraulic adjustment
Pull-Type Dual Tailwheel - 1,632 lb. (740 kg) with front and rear chain guards and hydraulic adjustment
Height
Deck - 10 1/8 in. (25.7 cm) (bottom of deck to bottom of skid shoe)
Deck - 10 1/8 in. (25.7 cm) (bottom of deck to bottom of skid shoe)
Width
Overall - 89 in. (2.26 m)
Overall - 89 in. (2.26 m)
Cutting Width
84 in. (2.13 m)
84 in. (2.13 m)
Length
Pull-Type Dual Tailwheel - 159 1/4 in. (4.04 m)
Pull-Type Dual Tailwheel - 159 1/4 in. (4.04 m)
Deck Thickness
Material - 10 ga. (3.4 mm)
Construction - All welded
Material - 10 ga. (3.4 mm)
Construction - All welded
Blades
(2) 1/2 x 4 x 31 in. (1.3 x 10.2 x 78.7 cm) heat treated alloy steel free-swinging high lift
Bolts - Keyed with harden flat washers and locknuts
(2) 1/2 x 4 x 31 in. (1.3 x 10.2 x 78.7 cm) heat treated alloy steel free-swinging high lift
Bolts - Keyed with harden flat washers and locknuts
Skirt Thickness
Side material - 1/4 in. (6 mm)
Side material - 1/4 in. (6 mm)
Blade Tip Speed
14,369 fpm (73 mps)
14,369 fpm (73 mps)
Blade Type
Heat treated alloy steel, free-swinging high lift
Heat treated alloy steel, free-swinging high lift
Cutting Capacity
3 in. (7.6 cm) diameter
3 in. (7.6 cm) diameter
Tractor PTO Speed
540 rpm
540 rpm
Hitch
Pull-type
Pull-type
Driveline Protection
4 plate slip clutch
4 plate slip clutch
Safety Features
Rear Guard - Metal band
Rear Guard - Metal band
Drive Motor
Gearbox Ratio - 1:1.21, Speed-up beveled gears; 1 3/8 in. (3.5 cm) - 6 in. spline input shaft
Gearbox Oil Capacity and Type - 6.5 pt. EP 80-90W gear lube
Gearbox Ratio - 1:1.21, Speed-up beveled gears; 1 3/8 in. (3.5 cm) - 6 in. spline input shaft
Gearbox Oil Capacity and Type - 6.5 pt. EP 80-90W gear lube
Skid Shoes
1/4 in. (6 mm) thick bolt-on replaceable
1/4 in. (6 mm) thick bolt-on replaceable
Tailwheel
4 x 8 x 15 in. (10.2 x 20.3 x 38.1 cm) laminated tire with cast iron hub
Mount - Welded A-arm and caster fork with 360° swivel
4 x 8 x 15 in. (10.2 x 20.3 x 38.1 cm) laminated tire with cast iron hub
Mount - Welded A-arm and caster fork with 360° swivel
Output Shaft
2 in. (5.1 cm)
2 in. (5.1 cm)
Operating Tongue Weight
Pull Type - 687 lb. (312 kg)
Pull Type - 687 lb. (312 kg)
Stump Jumper
3/16 x 24 x 38 in. (0.5 x 61 x 96.5 cm) Oval pan with 1 in. (2.5 cm) thick blade holder bar
3/16 x 24 x 38 in. (0.5 x 61 x 96.5 cm) Oval pan with 1 in. (2.5 cm) thick blade holder bar
Driveline -- Center
ASAE Category 4
ASAE Category 4
Tractor Size
60 - 130 hp (44.7 - 96.9 kW)
Kubota Matched - L / M
60 - 130 hp (44.7 - 96.9 kW)
Kubota Matched - L / M
Gearbox Protection
Cast iron housing
Cast iron housing