Compare Products

2020 Land Pride RC2512
2020 Land Pride RC2512

Specs

General Information

Manufacturer
Land Pride
Land Pride
Model Year
2020
2020
Model
RC2512
RC2512
Model Code
RC2512
RC2512
Color
Green
Green

Dimensions

Cutting Height Range
1.5 - 12 in.
1.5 - 12 in.
Weight
2,540 lb.
2,540 lb.
Height
11 in. deck
11 in. deck
Width

Overall - 151 in.

Minimum Transport - 95 in. with front cutting blade 1.5 in. off the ground

Overall - 151 in.

Minimum Transport - 95 in. with front cutting blade 1.5 in. off the ground

Cutting Width
144 in.
144 in.
Length
159 in.
159 in.

Hydraulics

Hydraulic Motor

LIft - 2.5 x 8 in. hydraulic cylinder, hoses, fittings and stroke control spacers

Wing-Folding Hydraulics - 2 x 8 in. hydraulic cylinders, hoses and fittings

LIft - 2.5 x 8 in. hydraulic cylinder, hoses, fittings and stroke control spacers

Wing-Folding Hydraulics - 2 x 8 in. hydraulic cylinders, hoses and fittings

Measurements

Wing Flex Angle
22° down and 45° up while cutting
22° down and 45° up while cutting
Deck Thickness

10 ga.

Height - 11 in.

10 ga.

Height - 11 in.

Blade Size
1/2 x 3 in.
1/2 x 3 in.
Blades

6 (2 per deck)

Rotation - Left Wing - Counterclockwise; Center Deck - Counterclockwise; Right Wing - Clockwise

Bolt - Keyed with hardened flat washer and lock nut

6 (2 per deck)

Rotation - Left Wing - Counterclockwise; Center Deck - Counterclockwise; Right Wing - Clockwise

Bolt - Keyed with hardened flat washer and lock nut

Skirt Thickness
3/16 in. plate
3/16 in. plate
Blade Overlap
6 in.
6 in.
Blade Tip Speed

Center - 16,500 fpm

Wing - 16,000 fpm

Center - 16,500 fpm

Wing - 16,000 fpm

Bladeholder/Carrier
1 x 3.5 in.
1 x 3.5 in.
Blade Type
Heat treated free swinging alloy steel with up lift
Heat treated free swinging alloy steel with up lift
Cutting Capacity
1.5 in.
1.5 in.

Operational

Hitch

LP performance hitch and swivel hitch

Weight - 793 lb.

LP performance hitch and swivel hitch

Weight - 793 lb.

Wheels

4 Wheels - 2 on transport axle and one on each wing axle

20.5 x 6.75 x 10 in. used aircraft tires or 21 in. laminated wheels

4 Wheels - 2 on transport axle and one on each wing axle

20.5 x 6.75 x 10 in. used aircraft tires or 21 in. laminated wheels

Tires

20.5 x 6.75 x 10 in. used aircraft tires or 21 in. laminated wheels

Number of Wheels - 4 - 2 on transport axle and one on each wing axle

Hubs - Cast iron 5-bolt with tapered roller bearings and 1.75 I. shafts

20.5 x 6.75 x 10 in. used aircraft tires or 21 in. laminated wheels

Number of Wheels - 4 - 2 on transport axle and one on each wing axle

Hubs - Cast iron 5-bolt with tapered roller bearings and 1.75 I. shafts

Safety Features

Wing Transport Protection - Wing transport locks

Front & Rear Guards - Single Chain

Wing Transport Protection - Wing transport locks

Front & Rear Guards - Single Chain

Input Drive Line
Cat 4 with a constant velocity u-joint
Cat 4 with a constant velocity u-joint
Drive Motor

Gearbox Shaft - Input - 1 3/8 in. 6 spline

Gearbox Lubrication - Splitter - 4.5 pt. 80 - 90W EP gearlube; Center & Wings - 4 pt. 80 - 90W EP gearlube

Gearbox Shaft - Input - 1 3/8 in. 6 spline

Gearbox Lubrication - Splitter - 4.5 pt. 80 - 90W EP gearlube; Center & Wings - 4 pt. 80 - 90W EP gearlube

Driveline -- Wing
Cat 3 with slip clutch
Cat 3 with slip clutch
Skid Shoes

Wing Deck - 1 replaceable per wing

Center Deck - 2 replaceable shoes

Wing Deck - 1 replaceable per wing

Center Deck - 2 replaceable shoes

Output Shaft
1.5 in.
1.5 in.
Operating Tongue Weight
793 lbs.
793 lbs.
Stump Jumper
10 gauge round dish shaped pan, reinforced
10 gauge round dish shaped pan, reinforced
Tractor Size
40 - 100 hp
40 - 100 hp
Gearbox HP Rating
160 hp splitter / 100 hp center and wings
160 hp splitter / 100 hp center and wings

Other

Warranty

Overall Unit and Driveline - 1 Year Parts and Labor

Gearbox - 5 Years Parts and Labor

Hydraulic Cylinder - 1 Year Parts and Labor

Overall Unit and Driveline - 1 Year Parts and Labor

Gearbox - 5 Years Parts and Labor

Hydraulic Cylinder - 1 Year Parts and Labor

Features

Features

  • 1-1/2" CUTTING CAPACITY: These cutters offers 1-1/2" cutting capacity. See Operator's Manual for more information.
  • LED SIGNAL LIGHTS: LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.
  • BEVELED SKID SHOES: Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.
  • 10 GAUGE STUMP JUMPER: Round stump jumper allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.

Features

  • 1-1/2" CUTTING CAPACITY: These cutters offers 1-1/2" cutting capacity. See Operator's Manual for more information.
  • LED SIGNAL LIGHTS: LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.
  • BEVELED SKID SHOES: Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.
  • 10 GAUGE STUMP JUMPER: Round stump jumper allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.