Manufacturer

Land Pride

Model Year

2024

Model

RCB5715

Model Code

NA

Color

Red

Weight

6,860 lb. (3,112 kg) weight includes base unit, eight 25.5 in. ACFF tires, walking tandem center and wing axles, CV Cat. 6 main driveline package, front and rear double chain guards, single acting fold cylinders, bar tite hitch, and forged blade bar with bolt-on dishpan blade carriers

Height

Deck - 12 in. (30.5 cm)

Width

Overall - 16 ft. (4.88 m)

Cutting Width

15 ft. (4.57 m)

Cutting Height

1-1/2 in. - 16 in. (3.8 - 40.6 cm) varies by tire option

Length

Overall - 16 ft. 3 in. (4.95 m) with center deck raised fully up

Hydraulic Motor

Lift (Center deck) - 3 1/2 x 8 in. Re-phasing hydraulic cylinder with hoses, fittings and flip-over spacers

Lift (Right wing) - 3 1/4 x 8 in. Re-phasing hydraulic cylinder with hoses and fittings

Lift (Left wing) - 3 x 8 in. Re-phasing hydraulic cylinder with hoses and fittings

Wing - 3 x 12 in. hydraulic cylinders, hoses and fittings

Lift (Center deck) - 3 1/2 x 8 in. Re-phasing hydraulic cylinder with hoses, fittings and flip-over spacers

Lift (Right wing) - 3 1/4 x 8 in. Re-phasing hydraulic cylinder with hoses and fittings

Lift (Left wing) - 3 x 8 in. Re-phasing hydraulic cylinder with hoses and fittings

Wing - 3 x 12 in. hydraulic cylinders, hoses and fittings

Wing Flex Angle

Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground

Deck Thickness

Top plate - 10 ga. (3.4 mm)

Bottom plate - 3/16 in. (5 mm)

Top plate - 10 ga. (3.4 mm)

Bottom plate - 3/16 in. (5 mm)

Blades

6 (2 per carrier) - 1/2 x 4 in. (1.3 x 10.2 cm) Heat-treated, free-swinging alloy steel with uplift

Bolt - Keyed with hardened flat washer and locknut

6 (2 per carrier) - 1/2 x 4 in. (1.3 x 10.2 cm) Heat-treated, free-swinging alloy steel with uplift

Bolt - Keyed with hardened flat washer and locknut

Skirt Thickness

Side construction - Removable / replaceable 1/4 in. (6 mm) steel

Blade Overlap

6 in. (15.2 cm)

Blade Tip Speed

Center Blades / Wing Blades - 16,400 fpm (83 mps) @ 540 rpm

Center Blades - 16,400 fpm (83 mps) @ 1,000 rpm

Wing Blades - 16,000 fpm (81.3 mps) @ 1,000 rpm

Center Blades / Wing Blades - 16,400 fpm (83 mps) @ 540 rpm

Center Blades - 16,400 fpm (83 mps) @ 1,000 rpm

Wing Blades - 16,000 fpm (81.3 mps) @ 1,000 rpm

Cutting Capacity

5 in. (13 cm)

Hitch

Pull-type

Type - Constant level swivel clevis, LP performance, Self leveling bar-tite, ball, or constant level pintle

LP Performance and Bar-Tite pivot shaft diameter - 2 1/4 in. (5.7 cm)

Jack - Standard 7,000 lb. (3,175.1 kg)

Pull-type

Type - Constant level swivel clevis, LP performance, Self leveling bar-tite, ball, or constant level pintle

LP Performance and Bar-Tite pivot shaft diameter - 2 1/4 in. (5.7 cm)

Jack - Standard 7,000 lb. (3,175.1 kg)

Wheels

Hubs - Cast iron 5-bolt hubs with tapered roller bearings and 1 3/4 in. (4.4 cm) shafts

Safety Features

Wing Transport Protection - Lock pin

Input Drive Line

Input driveline 540 and 1,000 rpm - Cat. 6 with constant velocity u-joint with or without over-running clutch

Drive Motor

Gearbox oil capacity - Splitter 5.5 pt. (2.6 l), Center deck and Wings 12.4 pt. (5.87 l)

Gearbox Lubrication - Gear Lube 80-90W EP

Gearbox oil capacity - Splitter 5.5 pt. (2.6 l), Center deck and Wings 12.4 pt. (5.87 l)

Gearbox Lubrication - Gear Lube 80-90W EP

Driveline -- Wing

Standard - Category 4 with slip-clutch or Category 5 with slip-clutch

Skid Shoes

Wing Deck - Each wing has one leading hardened beveled skid shoe and one trailing standard beveled skid shoe. Both are reversible and replaceable

Center Deck - Two replaceable beveled skid shoes and multiple mounting locations

Wing Deck - Each wing has one leading hardened beveled skid shoe and one trailing standard beveled skid shoe. Both are reversible and replaceable

Center Deck - Two replaceable beveled skid shoes and multiple mounting locations

Operating Tongue Weight

2,420 lb. (1,098 kg) with wings down

Driveline -- Center

Standard - Category 5 with slip-clutch

Tractor Size

60 - 250 hp (44.7 - 186.4 kW)

Kubota Matched - M

60 - 250 hp (44.7 - 186.4 kW)

Kubota Matched - M

Gearbox HP Rating

540 rpm or 1,000 rpm

250 hp (186 kW) Divider, 225 hp (168 kW) Center and Wings

540 rpm or 1,000 rpm

250 hp (186 kW) Divider, 225 hp (168 kW) Center and Wings

Warranty

Overall Unit and Drivelines - One year parts and labor

Gearbox - Five years parts and labor, 6th and 7th year parts only

Hydraulic Cylinder - One year parts and labor

Hoses and seals / Blades, Tires, and Driveline Friction Discs - Considered wear items

Overall Unit and Drivelines - One year parts and labor

Gearbox - Five years parts and labor, 6th and 7th year parts only

Hydraulic Cylinder - One year parts and labor

Hoses and seals / Blades, Tires, and Driveline Friction Discs - Considered wear items

Compare Products

2024 Land Pride RCB5715

2024 Land Pride RCB5715

General Information

Dimensions

Hydraulics

Measurements

Operational

Other

Features

Features

Powersports Company