Weight
Total Machine - 4,380 lb. (1,986.7 kg)
Total Machine - 4,380 lb. (1,986.7 kg)
Height
Deck - 12 in. (30.5 cm)
Deck - 12 in. (30.5 cm)
Width
Overall - 15 ft. 10 in. (4.83 m)
Overall - 15 ft. 10 in. (4.83 m)
Cutting Width
15 ft. (4.57 m)
15 ft. (4.57 m)
Cutting Height
1 1/2 - 16 in. (3.8 - 40.6 cm)
1 1/2 - 16 in. (3.8 - 40.6 cm)
Length
Overall - 16 ft. 3 in. (4.95 m) with center deck raised fully up
Overall - 16 ft. 3 in. (4.95 m) with center deck raised fully up
Wing Flex Angle
Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
Deck Thickness
Material - 10 ga. (3.4 mm)
Material - 10 ga. (3.4 mm)
Blades
6 (2 per carrier) - 1/2 x 4 in. (1.3 x 10.2 cm) Heat-treated, free-swinging alloy steel with uplift
Bolt - Keyed with hardened flat washer and locknut
6 (2 per carrier) - 1/2 x 4 in. (1.3 x 10.2 cm) Heat-treated, free-swinging alloy steel with uplift
Bolt - Keyed with hardened flat washer and locknut
Skirt Thickness
Side - 1/4 in. (6 mm) steel
Side - 1/4 in. (6 mm) steel
Blade Overlap
6 in. (15.2 cm)
6 in. (15.2 cm)
Blade Tip Speed
Center - 15,268 fpm (77.6 mps) @ 540 rpm
Wing - 15,000 fpm (76.2 mps) @ 540 rpm
Center - 15,578 fpm (79.1 mps) @ 1,000 rpm
Wing - 14,620 fpm (74.3 mps) @ 1,000 rpm
Center - 15,268 fpm (77.6 mps) @ 540 rpm
Wing - 15,000 fpm (76.2 mps) @ 540 rpm
Center - 15,578 fpm (79.1 mps) @ 1,000 rpm
Wing - 14,620 fpm (74.3 mps) @ 1,000 rpm
Bladeholder/Carrier
Reinforced with 1 x 4 in. (2.5 x 10.2 cm) blade bar
Reinforced with 1 x 4 in. (2.5 x 10.2 cm) blade bar
Cutting Capacity
3 in. (7.6 cm)
3 in. (7.6 cm)
Hitch
Pull-type
Swivel Clevis, LP Performance, Bar-Tite, Ball, or Pintle
Jack - Standard 7,000 lb. (3,175.1 kg)
LP Performance hitch and Bar tite hitch pivot shaft diameter - 2 1/4 in. (5.7 cm)
Pull-type
Swivel Clevis, LP Performance, Bar-Tite, Ball, or Pintle
Jack - Standard 7,000 lb. (3,175.1 kg)
LP Performance hitch and Bar tite hitch pivot shaft diameter - 2 1/4 in. (5.7 cm)
Wheels
Hubs - Cast iron 5-bolt hubs with tapered roller bearings and 1 3/4 in. (4.4 cm) shafts
Hubs - Cast iron 5-bolt hubs with tapered roller bearings and 1 3/4 in. (4.4 cm) shafts
Safety Features
Wing Transport - Wing transport lock pins
Wing Transport - Wing transport lock pins
Input Drive Line
Cat. 6 with constant velocity u-joint with or without overrunning clutch
Cat. 6 with constant velocity u-joint with or without overrunning clutch
Drive Motor
Gearbox - 540 rpm or 1,000 rpm
Gearbox Lubrication - Gear lube 80-90W EP
Gearbox oil capacity - Splitter - 3.5 pt. (1.66 l); Center Deck and Wings - 6 pt. (2.84 l)
Gearbox - 540 rpm or 1,000 rpm
Gearbox Lubrication - Gear lube 80-90W EP
Gearbox oil capacity - Splitter - 3.5 pt. (1.66 l); Center Deck and Wings - 6 pt. (2.84 l)
Driveline -- Wing
Standard - Cat. 4 with slip-clutch or Cat. 5 with slip-clutch
Standard - Cat. 4 with slip-clutch or Cat. 5 with slip-clutch
Skid Shoes
Wing Deck - 1 replaceable per wing
Center Deck - 2 replaceable
Wing Deck - 1 replaceable per wing
Center Deck - 2 replaceable
Operating Tongue Weight
Machine - 1,594 lb. (723 kg)
Machine - 1,594 lb. (723 kg)
Stump Jumper
3/16 in. (5 mm) thick round dish shaped pan
3/16 in. (5 mm) thick round dish shaped pan
Tractor Size
50 - 160 hp (37.3 - 119.3 kW)
Kubota Matched - MX / M
50 - 160 hp (37.3 - 119.3 kW)
Kubota Matched - MX / M
Gearbox HP Rating
160 hp (119.3 kW) divider, 130 hp (96.9 kW) center and wings
160 hp (119.3 kW) divider, 130 hp (96.9 kW) center and wings