Wing Flex Angle
While operating - Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
While operating - Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
Deck Thickness
Material - 10 ga. (3.4 mm)
Material - 10 ga. (3.4 mm)
Blades
6 (2 per deck) - 1/2 x 4 in. (13 mm x 10.2 cm) Heat treated free swinging alloy steel with up lift
Bolt - Keyed with hardened flat washer and locknut
Rotation - Left Wing - Clockwise, Center Deck / Right Wing - Counterclockwise
6 (2 per deck) - 1/2 x 4 in. (13 mm x 10.2 cm) Heat treated free swinging alloy steel with up lift
Bolt - Keyed with hardened flat washer and locknut
Rotation - Left Wing - Clockwise, Center Deck / Right Wing - Counterclockwise
Skirt Thickness
Side - 1/4 in. (6 mm) plate
Side - 1/4 in. (6 mm) plate
Blade Overlap
6 in. (15 cm)
6 in. (15 cm)
Blade Tip Speed
Center blades and wing blades - 14,963 fpm (76 mps) @ 540 rpm
Center blades and wing blades - 14,963 fpm (76 mps) @ 540 rpm
Bladeholder/Carrier
1 x 4 in. (2.5 x 10.2 cm) blade bar
1 x 4 in. (2.5 x 10.2 cm) blade bar
Cutting Capacity
1 1/2 in. (3.8 cm)
1 1/2 in. (3.8 cm)
Hitch
Pull-type hitch and clevis
Jack - Standard 2,000 lb. (907 kg)
Pull-type hitch and clevis
Jack - Standard 2,000 lb. (907 kg)
Wheels
29 in. Used aircraft tires or 21 in. laminated wheels
Number of wheels - 4 or 6 Total
Hubs - Cast iron five-bolt hubs with tapered roller bearings and 1 3/4 in. shafts
29 in. Used aircraft tires or 21 in. laminated wheels
Number of wheels - 4 or 6 Total
Hubs - Cast iron five-bolt hubs with tapered roller bearings and 1 3/4 in. shafts
Tires
29 in. used aircraft or 21 in. laminated
29 in. used aircraft or 21 in. laminated
Safety Features
Wing Transport Protection - Locks
Front and Rear Guards - Single chain or rubber
Wing Transport Protection - Locks
Front and Rear Guards - Single chain or rubber
Input Drive Line
ASAE Category 4 with constant velocity u-joint
ASAE Category 4 with constant velocity u-joint
Drive Motor
Gearbox Input Shaft - 1 3/8 in. 6 spline
Gearbox Lubrication and Capacity - Splitter - 4.5 pt. (2.13 l) of gear lube 80-90W EP
Gearbox Lubrication and Capacity - Center and Wings - 5.75 pt. (2.72 l) of gear lube 80-90W EP
Gearbox Input Shaft - 1 3/8 in. 6 spline
Gearbox Lubrication and Capacity - Splitter - 4.5 pt. (2.13 l) of gear lube 80-90W EP
Gearbox Lubrication and Capacity - Center and Wings - 5.75 pt. (2.72 l) of gear lube 80-90W EP
Driveline -- Wing
Intermediate - ASAE Category 3 with slip-clutch
Intermediate - ASAE Category 3 with slip-clutch
Skid Shoes
Wing Deck - 1 replaceable per wing
Center Deck - 2 replaceable
Wing Deck - 1 replaceable per wing
Center Deck - 2 replaceable
Output Shaft
Gearbox - 1 5/8 in.
Gearbox - 1 5/8 in.
Stump Jumper
10 ga. (3.4 mm) round dish shaped pan, reinforced
10 ga. (3.4 mm) round dish shaped pan, reinforced
Driveline -- Center
ASAE Cat. 4 with constant velocity U-joint
ASAE Cat. 4 with constant velocity U-joint
Tractor Size
50 - 100 hp (37 - 75 kW)
Kubota Matched - L / MX / M
50 - 100 hp (37 - 75 kW)
Kubota Matched - L / MX / M
Gearbox HP Rating
Splitter - 160 hp (119 kW)
Center and wings - 100 hp (75 kW)
Splitter - 160 hp (119 kW)
Center and wings - 100 hp (75 kW)