Compare Products

2018 Land Pride RCF2760
2018 Land Pride RCF2760

Specs

General Information

Manufacturer
Land Pride
Land Pride
Model Year
2018
2018
Model
RCF2760
RCF2760
Model Code
RCF2760
RCF2760
Color
Orange
Orange

Dimensions

Cutting Height Range
1.5 - 12 in.
1.5 - 12 in.
Weight
955 lb. (with front and rear single chain guards)
955 lb. (with front and rear single chain guards)
Height
Deck - 11.25 in.
Deck - 11.25 in.
Width
Overall - 67 in.
Overall - 67 in.
Cutting Width
60 in.
60 in.
Length
Overall - 109 in.
Overall - 109 in.

Measurements

Deck Thickness
10 ga., all welded
10 ga., all welded
Blade Size
1/2 x 4 x 25 in.
1/2 x 4 x 25 in.
Blades
(2) keyed with harden flat washers and lock nuts
(2) keyed with harden flat washers and lock nuts
Skirt Thickness
1/4 in.
1/4 in.
Blade Tip Speed
12,384 fpm
12,384 fpm
Blade Type
Heat treated alloy steel, free-swinging high lift
Heat treated alloy steel, free-swinging high lift
Cutting Capacity
3 in. dia.
3 in. dia.

Operational

Tractor PTO Speed
540 rpm
540 rpm
Hitch
Cat. I or II with floating top linkage, Quick Hitch ready
Cat. I or II with floating top linkage, Quick Hitch ready
Driveline Protection
4-plate slip clutch
4-plate slip clutch
Safety Features
Rear Guard - Single chain guard
Rear Guard - Single chain guard
Drive Motor

Gearbox - 540 rpm PTO driven; 1:1.44 speed up beveled gears; 1 3/8 in. - 6 spline input shaft

Lubricant - EP 80 - 90W oil

Oil Capacity - 7 pt.

Gearbox - 540 rpm PTO driven; 1:1.44 speed up beveled gears; 1 3/8 in. - 6 spline input shaft

Lubricant - EP 80 - 90W oil

Oil Capacity - 7 pt.

Skid Shoes
Replaceable bolt on skid shoes
Replaceable bolt on skid shoes
Tailwheel

4 x 8 x 15 in. laminated tire with cast iron hub and tapered roller bearings

Mount - Welded A-arm and caster fork with 360° swivel

4 x 8 x 15 in. laminated tire with cast iron hub and tapered roller bearings

Mount - Welded A-arm and caster fork with 360° swivel

Output Shaft
2 in.
2 in.
Stump Jumper
3/16 x 24 in. round pan
3/16 x 24 in. round pan
Driveline -- Center
ASAE Category 4
ASAE Category 4
Tractor Size
35 - 130 hp
35 - 130 hp
Gearbox HP Rating
130 hp
130 hp
Gearbox Protection
Cast iron housing
Cast iron housing

Other

Warranty

Overall Unit and Driveline - 1 Year Parts and Labor

Gearbox - 5 Years Parts and Labor

Overall Unit and Driveline - 1 Year Parts and Labor

Gearbox - 5 Years Parts and Labor

Features

Features

  • SURPASSED RUGGED INDUSTRY STANDARDS: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • LOWER CLEVIS TYPE 3-POINT HITCH: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • ROUND BACK DESIGN: Allows for more efficient handling and dispersing of material.
  • DRIVELINE HOLDER: Keeps driveline up out of dirt. Easier hook up of driveline.
  • HIGH CUTTING CAPACITY: Can cut brushy areas with saplings up to 3".
  • GEARBOX SEAL PROTECTION: Gearbox bottom seal protection for longer bearing life.

Features

  • SURPASSED RUGGED INDUSTRY STANDARDS: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • LOWER CLEVIS TYPE 3-POINT HITCH: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • ROUND BACK DESIGN: Allows for more efficient handling and dispersing of material.
  • DRIVELINE HOLDER: Keeps driveline up out of dirt. Easier hook up of driveline.
  • HIGH CUTTING CAPACITY: Can cut brushy areas with saplings up to 3".
  • GEARBOX SEAL PROTECTION: Gearbox bottom seal protection for longer bearing life.