Wing Flex Angle
Operating - Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
Operating - Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
Deck Thickness
Material - 10 ga. (3.4 mm)
Material - 10 ga. (3.4 mm)
Blades
6 (2 per carrier) - 1/2 x 4 in. (13 x 10.2 mm) heat-treated, free-swinging alloy steel with uplift
Bolt - Keyed with hardened flat washer and locknut
6 (2 per carrier) - 1/2 x 4 in. (13 x 10.2 mm) heat-treated, free-swinging alloy steel with uplift
Bolt - Keyed with hardened flat washer and locknut
Skirt Thickness
Side - 1/4 in. (6 mm) steel
Side - 1/4 in. (6 mm) steel
Blade Overlap
6 in. (15.2 cm)
6 in. (15.2 cm)
Blade Tip Speed
15,500 fpm (78.7 mps) @ 540 rpm
15,700 fpm (79.8 mps) @ 1,000 rpm
15,500 fpm (78.7 mps) @ 540 rpm
15,700 fpm (79.8 mps) @ 1,000 rpm
Bladeholder/Carrier
Reinforced with 1 x 4 in. (25 x 102 mm) blade bar
Reinforced with 1 x 4 in. (25 x 102 mm) blade bar
Cutting Capacity
3 in. (7.6 cm)
3 in. (7.6 cm)
Hitch
Pull-type
Swivel clevis, LP performance, Bar-Tite, Ball, or Pintle
Jack - Standard 7,000 lb. (3,175.1 kg)
Land Pride performance hitch and bar-tite hitch pivot shaft diameter - 2 1/4 in. (5.7 cm)
Pull-type
Swivel clevis, LP performance, Bar-Tite, Ball, or Pintle
Jack - Standard 7,000 lb. (3,175.1 kg)
Land Pride performance hitch and bar-tite hitch pivot shaft diameter - 2 1/4 in. (5.7 cm)
Wheels
Hubs - Cast iron five-bolt hubs with tapered roller bearings and 1 3/4 in. (4.4 cm) shafts
Hubs - Cast iron five-bolt hubs with tapered roller bearings and 1 3/4 in. (4.4 cm) shafts
Safety Features
Wing Transport - Wing transport lock pins
Wing Transport - Wing transport lock pins
Input Drive Line
Cat. 6 with constant velocity u-joint with or without overrunning clutch
Cat. 6 with constant velocity u-joint with or without overrunning clutch
Drive Motor
Gearbox Lubrication - Gear Lube 80-90W EP
Gearbox Oil Capacity - Splitter - 3.5 pt.; center deck and wings - 6 pt.
Gearbox Lubrication - Gear Lube 80-90W EP
Gearbox Oil Capacity - Splitter - 3.5 pt.; center deck and wings - 6 pt.
Driveline -- Wing
Standard - Category 4 with slip-clutch
Standard - Category 4 with slip-clutch
Skid Shoes
Wing Deck - 1 replaceable per wing
Center Deck - 2 replaceable
Wing Deck - 1 replaceable per wing
Center Deck - 2 replaceable
Stump Jumper
3/16 in. (5 mm) thick round dish shaped pan
3/16 in. (5 mm) thick round dish shaped pan
Driveline -- Center
Standard - Category 4 with slip-clutch
Standard - Category 4 with slip-clutch
Tractor Size
50 - 160 hp (37.3 - 119.3 kW)
Kubota Matched - MX / M
50 - 160 hp (37.3 - 119.3 kW)
Kubota Matched - MX / M
Gearbox HP Rating
540 rpm or 1,000 rpm - 160 hp (119.3 kW), Divider - 130 hp (96.9 kW) center and wings
540 rpm or 1,000 rpm - 160 hp (119.3 kW), Divider - 130 hp (96.9 kW) center and wings