Weight
Chain guards, 5 AC tires and standard clevis
Total - 5,620 lb. (2,549 kg)
Hitch - 2,220 lb. (998 kg)
Chain guards, 5 AC tires and standard clevis
Total - 5,620 lb. (2,549 kg)
Hitch - 2,220 lb. (998 kg)
Height
Deck - 13 in. (33 cm)
Deck - 13 in. (33 cm)
Width
Overall - 14 ft. 9 1/4 in. (4.5 m)
Minimum Transport - 9 ft. 2 1/2 in. (2.81 m) with cutting height at 2 in.
Overall - 14 ft. 9 1/4 in. (4.5 m)
Minimum Transport - 9 ft. 2 1/2 in. (2.81 m) with cutting height at 2 in.
Cutting Width
13 ft. 6 in. (4.11 m)
13 ft. 6 in. (4.11 m)
Cutting Height
2 - 12 in. (5 - 30 cm) maximum cut height is dependent on tire options selected
2 - 12 in. (5 - 30 cm) maximum cut height is dependent on tire options selected
Length
17 ft. 6 in. (5.33 m) with cutting height at 2 in.
17 ft. 6 in. (5.33 m) with cutting height at 2 in.
Wing Flex Angle
Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
Deck Thickness
Material - 1 - piece, 10 ga. (3.4 mm)
Material - 1 - piece, 10 ga. (3.4 mm)
Blades
(4) 2 per carrier - 1/2 x 4 in. (13 x 102 mm) heat treated free swinging alloy steel with up lift
Bolt - Keyed with hardened flat washer and locknut
(4) 2 per carrier - 1/2 x 4 in. (13 x 102 mm) heat treated free swinging alloy steel with up lift
Bolt - Keyed with hardened flat washer and locknut
Skirt Thickness
Side - 1/4 in. (6 mm) plate
Side - 1/4 in. (6 mm) plate
Blade Overlap
6 in. (15 cm)
6 in. (15 cm)
Blade Tip Speed
16,500 fpm (83.8 mps)
16,500 fpm (83.8 mps)
Bladeholder/Carrier
Reinforced with 1 x 4 1/2 in. blade mounting bar
Reinforced with 1 x 4 1/2 in. blade mounting bar
Cutting Capacity
2 in. (5 cm)
2 in. (5 cm)
Hitch
Pull-type
Jack - Standard 7,000 lb. (3,175 kg)
Pull-type
Jack - Standard 7,000 lb. (3,175 kg)
Wheels
Hubs - Cast iron 5-bolt hubs with tapered roller bearings and 1 3/4 in. shafts
Hubs - Cast iron 5-bolt hubs with tapered roller bearings and 1 3/4 in. shafts
Input Drive Line
Input Driveline - ASAE Cat. 6 with constant velocity u-joint
Intermediate and Wing Drivelines - Cat. 4 with slip-clutch
Input Driveline - ASAE Cat. 6 with constant velocity u-joint
Intermediate and Wing Drivelines - Cat. 4 with slip-clutch
Drive Motor
Gearbox Oil Capacity - 5.18 pt. (2.45 l); divider gearbox
6.76 pt. (3.2 l); center deck, LH deck and RH deck spindle gearboxes
Gearbox Lubrication - Gear lube 80-90W EP
Gearbox Oil Capacity - 5.18 pt. (2.45 l); divider gearbox
6.76 pt. (3.2 l); center deck, LH deck and RH deck spindle gearboxes
Gearbox Lubrication - Gear lube 80-90W EP
Skid Shoes
Wing Deck - Replaceable: 1 Standard straight skid shoe and 1 AR400 leading
Center Deck - Replaceable: 2
Weight Box - Reversible and Replaceable: 1
Wing Deck - Replaceable: 1 Standard straight skid shoe and 1 AR400 leading
Center Deck - Replaceable: 2
Weight Box - Reversible and Replaceable: 1
Stump Jumper
10 ga. (3.4 mm) round dish shaped pan
10 ga. (3.4 mm) round dish shaped pan
Tractor Size
Horsepower Required - 70-160 hp (52-119 kW)
Kubota Matched - M
Horsepower Required - 70-160 hp (52-119 kW)
Kubota Matched - M
Gearbox HP Rating
Splitter - 250 hp (186 kW)
Center and Wing - 130 hp (97 kW)
Splitter - 250 hp (186 kW)
Center and Wing - 130 hp (97 kW)