Cutting Height Range
2 - 12 in. (5.1 - 30.5 cm)
2 - 12 in. (5.1 - 30.5 cm)
Weight
2,104 lb. (954.4 kg) with hydraulic adjustment and front and rear single chain guards
2,104 lb. (954.4 kg) with hydraulic adjustment and front and rear single chain guards
Height
Deck - 13 3/8 in. (34 cm) (Bottom of deck to bottom of skid shoe)
Deck - 13 3/8 in. (34 cm) (Bottom of deck to bottom of skid shoe)
Width
Overall - 90 1/2 in. (2.30 m)
Overall - 90 1/2 in. (2.30 m)
Cutting Width
84 in. (2.13 m)
84 in. (2.13 m)
Length
Overall - 179 1/2 in. (4.56 m)
Overall - 179 1/2 in. (4.56 m)
Deck Thickness
Material - 3/16 in. (5 mm)
Construction - All welded
Material - 3/16 in. (5 mm)
Construction - All welded
Blades
(2) 1/2 x 4 in. (1.3 x 10.2 cm) heat treated alloy steel free-swinging high lift - low friction
Bolts - Keyed with harden flat washers and locknuts
(2) 1/2 x 4 in. (1.3 x 10.2 cm) heat treated alloy steel free-swinging high lift - low friction
Bolts - Keyed with harden flat washers and locknuts
Skirt Thickness
Side Material - 1/4 in. (6 mm)
Side Material - 1/4 in. (6 mm)
Blade Tip Speed
14,369 fpm (73 mps)
14,369 fpm (73 mps)
Blade Type
Heat treated alloy steel, free swinging high lift - low friction
Heat treated alloy steel, free swinging high lift - low friction
Cutting Capacity
4 in. (10.2 cm) diameter
4 in. (10.2 cm) diameter
Tractor PTO Speed
540 rpm
540 rpm
Hitch
Pull-type with clevis
Pull-type with clevis
Driveline Protection
4 plate slip clutch
4 plate slip clutch
Drive Motor
Gearbox - 1:1.21 Speed-up beveled gears, 1 3/4 in. (4.4 cm) - 20 spline input shaft
Gearbox Oil Capacity - 10 pt. (4.73 l)
Gearbox Lubricant - 80-90W oil
Gearbox - 1:1.21 Speed-up beveled gears, 1 3/4 in. (4.4 cm) - 20 spline input shaft
Gearbox Oil Capacity - 10 pt. (4.73 l)
Gearbox Lubricant - 80-90W oil
Skid Shoes
Replaceable bolt on
Replaceable bolt on
Tailwheel
4 x 8 x 21 in. laminated tire with cast iron hub
4 x 8 x 21 in. laminated tire with cast iron hub
Output Shaft
2 3/8 in. (6 cm)
2 3/8 in. (6 cm)
Transport Tongue Weight
Pull Type - 894 lb. (405.5 kg)
Pull Type - 894 lb. (405.5 kg)
Stump Jumper
3/16 in. (5 mm) Round dish shaped bolt-on stump-jumper with diamond shaped blade bar
3/16 in. (5 mm) Round dish shaped bolt-on stump-jumper with diamond shaped blade bar
Driveline -- Center
ASAE Category 5 with 4-plate slip clutch
ASAE Category 5 with 4-plate slip clutch
Tractor Size
50 - 190 hp (37.3 - 141.7 kW)
Kubota Matched - M
50 - 190 hp (37.3 - 141.7 kW)
Kubota Matched - M
Gearbox Protection
Cast iron housing
Cast iron housing