Cutting Height Range
1 1/2 - 12 in. (3.8 - 30.5 cm)
1 1/2 - 12 in. (3.8 - 30.5 cm)
Weight
955 lb. (433.2 kg) (with front and rear single chain guards)
955 lb. (433.2 kg) (with front and rear single chain guards)
Height
Deck - 11 1/4 in. (28.6 cm) (Bottom of Deck to Bottom of Skid Shoe)
Deck - 11 1/4 in. (28.6 cm) (Bottom of Deck to Bottom of Skid Shoe)
Width
Overall - 67 in. (1.70 m)
Overall - 67 in. (1.70 m)
Cutting Width
60 in. (1.52 m)
60 in. (1.52 m)
Length
Overall - 109 in. (2.77 m)
Overall - 109 in. (2.77 m)
Deck Thickness
Material - 10 ga. (3.4 mm)
Construction - All welded
Material - 10 ga. (3.4 mm)
Construction - All welded
Blades
(2)1/2 x 4 x 25 in. (1.3 x 10.2 x 63.5 cm) heat treated alloy steel free swing high lift
Bolts - Keyed with harden flat washers and locknuts
(2)1/2 x 4 x 25 in. (1.3 x 10.2 x 63.5 cm) heat treated alloy steel free swing high lift
Bolts - Keyed with harden flat washers and locknuts
Skirt Thickness
Side material - 1/4 in. (6 mm)
Side material - 1/4 in. (6 mm)
Blade Tip Speed
12,384 fpm (62.9 mps)
12,384 fpm (62.9 mps)
Blade Type
Heat treated alloy steel, free-swinging high lift
Heat treated alloy steel, free-swinging high lift
Cutting Capacity
3 in. (7.6 cm) diameter
3 in. (7.6 cm) diameter
Tractor PTO Speed
540 rpm
540 rpm
Hitch
3-point
Category l or II with floating top linkage, quick ready
3-point
Category l or II with floating top linkage, quick ready
Driveline Protection
4 plate slip clutch
4 plate slip clutch
Safety Features
Rear Guard - Single chain guard
Rear Guard - Single chain guard
Drive Motor
Gearbox - 540 rpm power take-of driven; 1:1.44 speed up beveled gears; 1 3/8 in. (3.5 cm) - 6 spline input shaft
Gearbox Lubricant - EP 80-90W oil
Gearbox Oil Capacity - 7 pt. (3.31 l)
Gearbox - 540 rpm power take-of driven; 1:1.44 speed up beveled gears; 1 3/8 in. (3.5 cm) - 6 spline input shaft
Gearbox Lubricant - EP 80-90W oil
Gearbox Oil Capacity - 7 pt. (3.31 l)
Skid Shoes
Replaceable bolt on skid shoes
Replaceable bolt on skid shoes
Tailwheel
4 x 8 x 15 in. (10.2 x 20.3 x 38.1 cm) laminated tire with cast iron hub and tapered roller bearings
Mount - Welded A-arm and caster fork with 360° swivel
4 x 8 x 15 in. (10.2 x 20.3 x 38.1 cm) laminated tire with cast iron hub and tapered roller bearings
Mount - Welded A-arm and caster fork with 360° swivel
Output Shaft
2 in. (5.1 cm)
2 in. (5.1 cm)
Stump Jumper
3/16 x 24 in. (0.5 x 61.0 cm) round pan
3/16 x 24 in. (0.5 x 61.0 cm) round pan
Driveline -- Center
ASAE Category 4
ASAE Category 4
Tractor Size
35 - 130 hp (26.1 - 96.9 kW)
Kubota Matched - L / MX / M
35 - 130 hp (26.1 - 96.9 kW)
Kubota Matched - L / MX / M
Gearbox Protection
Cast iron housing
Cast iron housing